VICAR PRESSES

EMAIL US FOR CURRENT PRICING

PRES-N-SNAP

Presenting the versatile and easy-to-use PRE-N-SNAP, capable of setting our V-Line Fasteners with an easy change of the dies. Most of our dies have rubber retainers to hold the fasteners in place for easy installation. The heat-treated, cast-aluminum body makes the PRES-N-SNAP both lightweight and durable, ensuring years of trouble-free service. The PRES-N-SNAP and its components are manufactured in the USA.

PRES-N-SNAP Computer Code # 21-20

BENCH PRESS

bench press

• Cast iron and steel construction
• Interchangeabe with all hand and foot machine dies
• Adjustable lower die holder
• Easy mounting to wooden table/bench
• Throat depth 3"
• Uses 3/8" standard diameter shank dies to set grommets, washers or snap fasteners in one motion
• Weight 7 lbs.

Computer Code # 21-45

Bench Press and Dies

COMP CODE #	DESCRIPTION
21-45	Bench Press
21-25	VL-10128 Cap Die
21-30	VL-10224 Socket Die
21-35	VL-10370 Stud Die
21-40	VL-10412 Eyelet Die
21-60	VL-12105 Baby Cap Die
21-65	VL-12205 Baby Socket Die
21-70	VL-12303 Baby Stud Die
21-75	VL-12402 Baby Eyelet Die
21-81	VL-18100 One-Way Cap Die
21-85	VL-18201 One-Way Socket Die
21-90	VL-18303 One-Way Stud Die
21-40	VL-10412 Eyelet Die (Used w/ 1-Way)
21-95	VL-16358 Stud Die
21-96	VL-16509 Washer Die
FOR PLASTIC SNAP FASTENERS
21-97	VL-4505 Cap/Eyelet Die
21-98	VL-4501 Socket Die
21-99	VL-4515 Stud Die

Information contained herein is the property of ARO 2000 & may not be reproduced or used without permission.

Call - 845-778-1314, fax 845-778-3968 or email us

A DIVISION OF PUTT GEORGI LTD.

VICAR PRESSES

Copyright © ARO 2000. All rights reserved.Revised: April 04, 2012

Copyright © ARO 2000. All rights reserved.
Revised: April 04, 2012