Corvette 1956 - PRESENT
Information subject to change without notification. New items added daily. Confirm at time of ordering.PRODUCTS AVAILABLE: CONVERTIBLE TOPS, PADS
Pre 1961 models are "SPECIAL ORDER - NON RETURNABLE", or as noted with an *.
ARO patterns have been proven by many "in house" & "field" installations by professional restorers & installation centers for over 70 years. Additionally - ARO was the "OE" manufacturer for GM, FORD, CHRYSLER, & many other auto manufacturers from 1958 - 1995, manufacturing convertible tops, glass, & other items from patterns provided by the auto manufacturers. OE patterns on file with the factory part #'s & specifications.
It is extremely important to set the rear bow height to the proper settings. Your auto could have had many tops installed over the years. Each manufacturer has a bow height which is suitable for their product & may vary from ours. We have suggested installation guide marks on many patterns, as well as suggested or proven bow height suitable to install our products properly.
We offer "GENERIC installation" instructions, based on many years of personal trim installation experience. Each auto has a wide variety of problems, which might be encountered during installation. We recommend Dealer service manual(s) as an excellent guide, with all factory specifications & parts lists. These manuals can be located on the Internet, swap meets, or local car clubs specializing in your model.
CORVETTE | * SPECIAL ORDER-NON RETURNABLE | BOW | |||
* | 56-60 | CORVETTE | |
| |
| | TOP W/CURTAIN AS 1 PC | STITCHED WINDOW | 243-001/2 | |
| | *Recommended materials - SUPERWEIGHT (11) | |||
