ARO PATTERNS HAVE BEEN PROVEN BY MANY "IN HOUSE" & "FIELD" INSTALLATIONS BY PROFESSIONAL RESTORERS & INSTALLATION CENTERS FOR OVER 70 YEARS. ADDITIONALLY - ARO WAS THE "OE" MANUFACTURER FOR GM, FORD, CHRYSLER, & MANY OTHER AUTO MANUFACTURERS FROM 1958 - 1995, manufacturing convertible tops, GLASS, & OTHER ITEMS FROM PATTERNS PROVIDED BY THE AUTO MANUFACTURERS. OE patterns on file with the factory part #'s & specifications.
IT IS EXTREMELY IMPORTANT TO SET THE REAR BOW HEIGHT TO THE PROPER SETTINGS. YOUR AUTO COULD HAVE HAD MANY TOPS INSTALLED OVER THE YEARS. EACH MANUFACTURER HAS A BOW HEIGHT WHICH IS SUITABLE FOR THEIR PRODUCT & MAY VARY FROM OURS. WE HAVE SUGGESTED INSTALLATION GUIDE MARKS ON MANY PATTERNS, AS WELL AS SUGGESTED OR PROVEN BOW HEIGHT SUITABLE TO INSTALL OUR PRODUCTS PROPERLY.
WE DO NOT OFFER PRINTED "INSTALLATION" INSTRUCTIONS. EACH AUTO HAS A WIDE VARIETY OF PROBLEMS WHICH MIGHT BE ENCOUNTERED DURING INSTALLATION. WE DO RECOMMEND THE DEALER SERVICE MANUAL(S) AS AN EXCELLENT GUIDE, WITH ALL FACTORY SPECIFICATIONS & PARTS LISTS. THESE MANUALS CAN BE LOCATED ON THE INTERNET, SWAP MEETS, OR LOCAL CAR CLUBS SPECIALIZING IN YOUR MODEL.
We strongly urge the installation of these items be performed by PROFESSIONAL installation centers with the correct tools & experience to handle any conceivable problem which might arise.
WE ARE ADDING NEW ITEMS DAILY. CALL FOR MODELS NOT LISTED
button in the right hand column of the part you need.
TRIUMPH | | | |
|
